Vender Universal Motorcycle Motorbike Handlebar Warm Heated Grip Kit Pads al mejor precio

Features: 1. Faster heating, more uniform heating, and successfully passed 8000 wear tests 2. Built-in intelligent temperature control chip, three-speed adjustable temperature, intelligent temperature control is safer 3. 10 seconds rapid heating, large heating area 4. The heating sheet is fixed by Velcro, which is convenient and quick 5. IP67 waterproof level, even if the switch and handle cover are soaked in water, they can work normally. When the handle cover needs to be cleaned, only unplug the plug and wash with water, which is very convenient Specification: Input voltage: DC12V Cable length: 108CM (heating film to switch), 146CM (switch to electric door lock) Working temperature: -30°C---+100°C Power: high-end 20W, mid-range 15W, low-end 10W Material: composite fiber heating wire + Kevlar wear-resistant cloth, (L bracket) stainless steel Installation method: 3M glue sticking and fixing, L bracket lens holder fixing Wiring method: red connect to the positive pole, black connect to the negative pole (the lamp does not turn on when the connection is reversed, only heating) Instructions: Power on: red light, blue light and green light each flash once and then go out Standby: the red light is breathing and flashing, and the temperature reaches a certain temperature and it will automatically turn into a blue light Working status: indicator light is always on (high-end: red light is always on, mid-range: blue light is always on, low-end, green light is always on) Click on the key: switch gears Note: The positive and negative poles are connected reversely, the switch cannot be used, and the heating element directly heats up Notice: 1. Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, if the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium gear first to prevent high temperature burns 2. This product is only suitable for motorcycles with 12V battery. Please read the installation diagram carefully before installation. Incorrect wiring will cause damage to the components. 3. This product can only be installed on the handlebars of motorcycles to be powered on. You can use a battery to test whether the product is properly powered on before installation 4. It is strictly forbidden to energize and work when not riding (empty burning) to prevent the electric handle cover from overheating and damage the original handlebar 5. It is recommended to connect the electric door lock wire for the wiring. Most models have black positive pole and green negative pole. For specific conditions, it is recommended to use a multimeter to measure Include: 1 set x Motorbike Handlebar Heated Grip Kit Pads