Vender ♟Evs_WUPP 1 Pair Throttle Handlebar Grip Motorcycle Electric Cycling Heated Grip al mejor precio

WUPP 1 Pair Motorcycle Throttle Handlebar Grips Smart 5 Speed Temperature Control Electric Heating Handle Cover Cycling Accessories Feature: 1. The handle is made of TPV material (thermoplastic vulcanized rubber), integrally formed, has good anti-aging, heat resistance, high toughness, high resilience and other properties, durable and environmentally friendly, and has a wider range of use 2. The product is equipped with 5 speed adjustment switch, the temperature can be adjusted at will, keeping your hands warm in winter and saying goodbye to frostbite 3. Built-in smart chip, when the voltage is too high or too low, it will automatically cut off the power and enter the standby state, which is safer to use 4. High-strength waterproof design, not afraid of wind and rain, rain and snow can also be used normally 5. The tail plug of the handle is detachable, and it can be sealed or vented, making it more convenient to use 6. It can be installed on DC12V motorcycles, scooters, ATVs, and three-wheeled motorcycles, with a wider range of applications. Specification: Product model: CS-990A1 Net weight: 307g Gross weight: 365g Product size: 13.3 * 3.7cm Package size: 20.5 * 13.5 * 6cm Packing method: Kraft carton Product material: TPV Starting voltage: 12.4V ± 0.2 Output power: 20-40W Operating temperature: - 15 ° C-50 ° C Applicable pipe diameter: 2.2cm Scope of application: suitable for installation and use of DC12V scooters, motorcycles, ATVs, and tricycles Protection voltage: When the voltage is lower than 16 ±0.2 volts, the heating handle turns off the output, and the controller enters the dormant state Instructions: 1. The red line is the positive pole and the black line is the negative pole. Please do not connect it incorrectly, otherwise the product may be damaged 2. Power on the controller, the indicator light flashes for 3 times and enters the standby state (remarks: the flashing color of the indicator light is green, indicating normal, and the color is blue, indicating that the protection function does not work (controller failure), but it can also be heated normally) 3. In the standby mode, press the button on the handle. If the power supply voltage is lower than the starting voltage of electric heating, the red indicator flashes for several times to enter the standby mode. 4. In standby mode, press the button on the handle. If the power supply voltage is higher than the electric heating starting voltage, the system will enter rapid heating to make the handle rise rapidly. After a period of time, it will enter stable heating. 5. In the working state, each time the button is pressed, the electric heating power will increase by 20%, with a total of 5 gears. The color of the indicator light is: blue-green-purple-red. 6. In the working state, when the power supply voltage is lower than the electrothermal starting voltage, the corresponding gear indicator flashes. If it has been lower than this voltage within 7 seconds, the controller will cut off the electrothermal output and enter the standby state. If the normal voltage is restored within 7 seconds, the indicator will be on normally and enter normal operation. 7. In the working state, if the power supply voltage is higher than the set maximum voltage value, the controller immediately cuts off the heating output and enters the standby state. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1pair X Electric Heating Grip