Vender （Enviado em 24 horas）Controle Remoto/Chave Universal Com Controle Sem Fio Para Porta De Garagem EléTrica,433mhz Keya De Controle Remoto Abridor De Porta De Garagem Duplicador De Controle hiccup al mejor precio

Package Included: 1 * 433MHZ remote control duplicator. Specifications: Material: Plastic. Size: 60*36*12mm. Color: As pictures show. Type: Wireless remote. For: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on. Rated voltage: 12V Battery(included). Wireless transmission distance: 50-150 (m). (open space) Description: Cloning chip types: 2260(PT,SC,LX,HX2260); 2262,(PT,SC,LX,HS,HX2262),PT2264,PT2240(LX2240),1527( EV,HS,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,680,6207,6010,6012,6013,6014,12D, 46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model. Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. Use steps: 1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code. 2. Copy: Press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control. 3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light long, this Indicating that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control. 4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows: (1) first clear code; (2) after clearing code, copy the unsuccessful key again, and there is no need to copy the rest buttons; (3) and then clear the code again; note: rolling code remotes will not work