Vender Controle Remoto Rf 4-channel Sem Fio 433 Mhz Controle Remoto De Porta Portão Elétrico hiccup al mejor precio

Package Included: 1*Remote Control 1*Manual Specifications: Model: LZ-960 Packing method: sealed bag Working voltage: DC3V (built-in a 2032 button battery) Working current: 12mA@3V Radiation power: 12mw@3V Transmission frequency: 433MHZ Transmission distance: 50-100M (open area, the sensitivity of the receiving device is minus 100dbm) Encoder type: fixed code. learning code. Color: black, white Size: 5.6*3.2*1.1 (cm) Weight: 18 (g) Application range: The remote control is widely used, mainly used for remote control of electric retractable doors, elevators, remote control barriers, remote control rolling doors, garage doors, sliding doors, remote control LED lights, remote control fireworks igniters, remote control passenger doors, anti-theft alarms, electric door alarms , MP3 motorcycle anti-theft alarm, etc. Description: 100% Brand New and High Quality！ Cloning chip types: 2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model. Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend copying the rolling code remote control. Use steps: 1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully.