México

⚡Prometion⚡HappyModel Larva X Crazybee F4 PRO V3 AIO 200mW Diamond VTX Runcam Nano2 1103 KV7000 2-3S 2.5inch 100mm Brushless FPV Drone
Features:
1. Receiver option: Frsky SPI Receiver, BNF ,DSM2/X SPI Receiver,
Diamond VTX Ready.
2. Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles.
3. VTX power switchable 25mw~200mw
4. Smartaudio ready, change VTX bands, powers, channels via OSD.
5. Compatible both for 2s-3s Lipo/LIHV. Camera Angle adjustable.



Description:
Crazybee F4 PRO V3.0 AIO flight controller compatible for 2-4s Lipo, which is powerful and smoothly

Specifications:
Brand: Happymodel
Wheelbase: 100mm
Size: 88mm*88mm*45mm(without propellers)
Weight: 50g(without battery)


Motor:
Mode: EX1103
KV options: KV7000
Configu-ration:9N12P
Stator Diamter: 11mm
Stator Length: 3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g): 3.7g


Flight controller:
(version 1) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(version 2) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Version 1 Built-in SPI receiver with telemetry(D8/D16 switchable)
Version 2 Built-in SPI receiver with telemetry(AFHDS/AFHDS2A switchable)
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection


Onboard 4in1 ESC:
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 10A continuous peak 12A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_5.HEX
Default protocol: DSHOT600


Internal NON-EU receiver Version 1:
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference (Transmitter and receiver 1 m from the ground): 300m


Internal receiver Version 2:
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference (Transmitter and receiver 1 m from the ground): 300m
Failsafe support


External TBS Crossfire version:
CRSF Protocol, Official TBS transmitter compatible


External DSMX version:
Frequency range: 2.403-2.479Ghz
Input power: 3.3V - 5V
Response time: 22ms / 11ms
Resolution: 1024/2048
Display method: LED
Operating voltage: 3.3V
Working current: 60MA
Size: 18mm*13mm*5mm
Weight: 0.9 g
Antenna length: 30mm
Data format: Serial port
Protocol: DSM2/DSMX
Distance: no ground interference (1 m from the ground)&gt; 300m


External Frsky RXSR version:
Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
Operating Voltage Range: 3.5V~10V
Operating Current:70mA@5V
Firmware Upgradable
Compatibility: FrSky X Series modules and radios in D16 mode
Could support Frsky New ACCST Protocol (Upgrade firmware)


Diamond_VTX:
Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 250mA~510mA(type)
Antenna: RG178 antenna
U.FL interface
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready
Weight: 3g without antenna
Video Output Size: VGA (640x480)
Video Output format: NTSC
Record video size: 1280x720 @25FPS
TF Card support: Max.32G
Interface: JST SH1.0 3pin for Camera
JST SH1.0 5pin for Connect with F3/F4 Flight controller
Compress Format: AVI


Runcam NANO2:
Model: Nano 2
Image Sensor: 1/3" CMOS
Horizontal Resolution: 700TVL
Lens: 2.1mm(M8) FOV 155°
Signal System: NTSC / PAL
S/N Ratio: &gt;50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power: DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 3.2g
Dimensions: L14mm*W14mm*H16mm

Package Included:
1* Larva X frame
1* Receiver
4* 1103 KV7000 motor
8* Micro Avan rush propeller 2.5inch(4cw+4ccw)
1* Camera: Runcam Nano2
1* VTX: 5.8g 25mw~200mw switchable with 720p DVR (Diamond_vtx)
1* Propeller disassemble tool
1* Screwdriver

Notes:
1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.