México

Features:

Works for oil,fuel,diesel,gas,water,air pressure.

Can be used in oil tank,gas tank,diesel tank etc.

It's an advance pressure sender than traditional mechanical pressure sender;

CMC for Load Cell Sensor;

CMC for Pressure and Pull Pressure Sensor.

Specifications:

Material: Stainless steel body.

5 psi

Input: 0-5 psi(Gauge Pressure);

Output: 0- 4.5V linear voltage output. 0 psi outputs 0.5V, 2.5 psi outputs 2.5V, 5 psi outputs 4.5V.

Accuracy: +/-0.5%FS;

Thread: 1/8" NPT;

Wiring Connector: Packard plug-in unit is included;

Wiring: Red: +5V; Black: ground; Green: signal output;

Overload Capacity: 2-4 times;

Working Temperature: -40—+120ºC;

Compensation Temperature: -20—+80ºC;

Protection Class: IP67;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤(supply power-6.5V/0.02A)Ω;

Long-term stability: Less than 0.1%FS/year;

Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Shock Resistance: 1000g;

Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mΩ 500VDC;

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50051-1.

15 psi

Input: 0-15 psi(Gauge Pressure);

Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 7.5 psi outputs 2.5V, 15 psi outputs 4.5V.

Accuracy: +/-0.5%FS;

Thread: 1/8" NPT;

Wiring Connector: Packard plug-in unit is included;

Wiring: Red: +5V; Black: ground; Green: signal output;

Overload Capacity: 2-4 times;

Working Temperature: -40—+120ºC;

Compensation Temperature: -20—+80ºC;

Protection Class: IP67;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤ (supply power-6.5V/0.02A)Ω;

Long-term stability: Less than 0.1%FS/year;

Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Shock Resistance: 1000g;

Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mΩ 500VDC;

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50051-1.

30 psi

Input: 0-30 psi.

Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 15psi outputs 2.5V, 30 psi outputs 4.5V.

Accuracy: within 2% of reading (full scale).

Thread: 1/8"-27 NPT.

Wiring connector: water sealed quick disconnect. Mating connector is included.

Wiring: Red for +5V. Black for ground. Blue for signal output.

60 psi

Input: 0-60 psi(Gauge Pressure);

Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 30 psi outputs 2.5V, 60 psi outputs 4.5V.

Accuracy: +/-0.5%FS;

Thread: 1/8" NPT;

Wiring Connector: Packard plug-in unit is included;

Wiring: Red: +5V; Black: ground; Green: signal output;

Overload Capacity: 2-4 times;

Working Temperature: -40—+120ºC;

Compensation Temperature: -20—+80ºC;

Protection Class: IP67;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤(supply power-6.5V/0.02A)Ω;

Long-term stability: Less than 0.1%FS/year;

Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Shock Resistance: 1000g;

Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mΩ 500VDC;

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50051-1.

100 psi

Input: 0-100 psi.

Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.

Accuracy: within 2% of reading (full scale).

Thread: 1/8"-27 NPT.

Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.

Wiring: Red for +5V. Black for ground. Blue for signal output.

150 psi

Input: 0-150 psi(Gauge Pressure);

Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V.

Accuracy: +/-0.5%FS;

Thread: 1/8" NPT;

Wiring Connector: Packard plug-in unit is included;

Wiring: Red: +5V; Black: ground; Green: signal output;

It's an advance pressure sender than traditional mechanical pressure sender;

Overload Capacity: 2-4 times;

Working Temperature: -40—+120ºC;

Compensation Temperature: -20—+80ºC;

Protection Class: IP67;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤ (supply power-6.5V/0.02A)Ω;

Long-term stability: Less than 0.1%FS/year;

Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Shock Resistance: 1000g;

Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mΩ 500VDC;

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50051-1;

200 psi

Pressure Range: 0-200 psi

Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5V

Working Temperature: -40—+125ºC;.

Accuracy: ±1%FS;

Thread: 1/8"-27 NPT.

Overload Capacity: 2 times;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤(supply power-6.5V/0.02A)Ω;

Long-term stability: ± 0.2%FS/year;

Temperature Effect on Zero: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;

Shock Resistance: 100g;

Anti-Shock: ≤±0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mΩ 500VDC;

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3 ;

Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.

Wiring: Red for IN+. Black for GND. Green for OUT.

300psi

Input: 0-300 psi(Gauge Pressure);

Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 150 psi outputs 2.5V, 300 psi outputs 4.5V.

Accuracy: +/-0.5%FS;

Thread: 1/8" NPT;

Wiring Connector: Packard plug-in unit is included;

Wiring: Red: +5V; Black: ground; Green: signal output;

Overload Capacity: 2-4 times;

Working Temperature: -40—+120ºC;

Compensation Temperature: -20—+80ºC;

Protection Class: IP67;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤ (supply power-6.5V/0.02A)Ω;

Long-term stability: Less than 0.1%FS/year;

Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Shock Resistance: 1000g;

Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mΩ 500VDC

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50051-1.

500 psi

Input: 0-500 psi(Gauge Pressure);

Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 250 psi outputs 2.5V, 500 psi outputs 4.5V.

Accuracy: +/-1%FS;

Thread: 1/8" NPT;

Wiring Connector: Packard plug-in unit is included;

Wiring: Red: +5V; Black: ground; Yellow(Green): signal output;

Overload Capacity: 2-4 times;

Working Temperature: -40—+120ºC;

Compensation Temperature: -20—+80ºC;

Protection Class: IP67;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤ (supply power-6.5V/0.02A)ω;

Long-term stability: Less than 0.1%FS/year;

Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Shock Resistance: 1000g;

Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mω 500VDC;

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50051-1.

1000 psi

Input: 0-1000 psi.

Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 500 psi outputs 2.5V, 1000 psi outputs 4.5V.

Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.

Accuracy: within 2% of reading (full scale).

Thread: 1/8"-27 NPT.

Wiring connector: water sealed quick disconnect. Mating connector is included.

Wiring: Red for +5V. Black for ground. Blue for signal output.

1600psi

Input: 0-1600 psi(Gauge Pressure);

Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 800 psi outputs 2.5V, 1600 psi outputs 4.5V.

Accuracy: +/-0.5%FS;

Thread: 1/8" NPT;

Wiring Connector: Packard plug-in unit is included;

Wiring: Red: +5V; Black: ground; Green: signal output;

Overload Capacity: 2-4 times;

Working Temperature: -40—+120ºC;

Compensation Temperature: -20—+80ºC;

Protection Class: IP67;

Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;

Load Resistance: ≤ (supply power-6.5V/0.02A)Ω;

Long-term stability: Less than 0.1%FS/year;

Temperature Effect on Zero: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Temperature Effect on Sensitivity: Typical:0.02%FS/ºC; Maximum:0.05%FS/ºC;

Shock Resistance: 1000g;

Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g);

Response Time: ≤1ms;

Insulation Resistance: &gt;100mΩ 500VDC;

Explosion-proof Class: ExiaTTCT6;

Electromagnetism Compatibility: EN50051-1.
Include:
1 x Pressure transducer (With cable)