Vender tro Optical Coaxial Switch RCA 3.5mm Jack Digital to Analog Audio Adapter Converter al mejor precio

#Optical #Coaxial #Switch #RCA #3.5mm #Jack #Digital #to #Analog #Audio #Adapter #Converter Optical Coaxial Switch RCA 3.5mm Jack Digital to Analog Audio Adapter Converter Description: 100% brand new and high quality Feature: Digital to analog audio converter is designed for home or professional audio switching. Convert coaxial or for Tosink digital audio signals to analog L/R audio. It can be connected to external devices such as amplifiers through standard RCA jacks. You can also output 3.5mm headphone jacks to connect high-fidelity headphones. Support 32kHZ, 44.1kHZ, 48kHZ, 96kHZ and 192kHZ sampling rate, up to 24-bit resolution. Supports for Toslink input to coaxial output, and for Toslink output coaxial input. Built-in high-fidelity amplifier chip, headphones and RCA output port, support 16-300 ohm high-fidelity headphones. Support power off, volume adjustment, easier to adapt to different sources and different environments. Can adapt to more digital audio amplifier interfaces. 24-bit/SPDIF input bit stream on the left and right channels. Provide no electromagnetic noise transmission. The converter is compact, easy to install and easy to operate. Specifications: Item Type: Audio Adapter Converter Material: ABS+Metal Size: 81x71x25mm/3.1x2.7x0.9in Color: Black Signal input/output Input audio: coaxial or for Toslink digital audio Output audio: L/R, headphones, for Toslink Connector Input audio connector: for Toslink, 1xRCA (coaxial) Output analog audio connector: 2xRCA (R/L) and 3.5mm headphones Output digital audio connector: for Toslink, 1xRCA (coaxial) Sampling rate: 32, 44.1, 48, 96 and 192Khz, up to 24-bit resolution Maximum output power: 16Ω: 200mW, 300Ω: 20mW Distortion: less than 0.01% (10 mW) Headphone impedance: 16Ω-300Ω Frequency response: 10Hz-48KHz Working temperature: 0℃-70℃ Operating humidity: 10% to 85% RH (no condensation) Storage temperature: -10℃-80℃ Storage humidity: 5% to 90% RH (no condensation) External power supply: 5V DC 500mA Power consumption: 0.5 watts (maximum) Quantity: 1 PC Connection and operation: Before installing, make sure that all the solutions you want to connect are closed. 1.Use an appropriate Toslink or coaxial cable to connect the audio source device to the converter. 2.Use an appropriate R/L cable to connect the A/V receiver or amplifier to the converter. 3.Insert the DC side of the 5V power supply into the converter, then connect the AC side of the power supply to the wall outlet, and turn the power switch to adjust the volume. Note: Gently insert/remove the cable. Note: Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x Host 1 x Power Supply 1 x User Manual