Vender Solar Controller Solar Panel Controller with Dual USB Port 12V/24V MPPT/PWM Auto Paremeter Adjustable ignition al mejor precio

Package Included: 1X Solar Panels Battery Charge Controller 1X User Manual Specifications: Name: LCD screen solar controller Voltage: DC 12V / 24V Display: LCD screen Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 ℃ -60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: power is respectively 100-1000W 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: power is respectively 200-2000W Description: Feature： - Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. - Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. - Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. - Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. - Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Notes: 1. The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries.