New 433MHz E32-TTL-100 LoRa SX1278/SX1276 433M RF Wireless Transceiver Module ☆BrzoneSeMallVP (1)
New 433MHz E32-TTL-100 LoRa SX1278/SX1276 433M RF Wireless Transceiver Module ☆BrzoneSeMallVP (2)
New 433MHz E32-TTL-100 LoRa SX1278/SX1276 433M RF Wireless Transceiver Module ☆BrzoneSeMallVP (3)
New 433MHz E32-TTL-100 LoRa SX1278/SX1276 433M RF Wireless Transceiver Module ☆BrzoneSeMallVP (4)

Vender New 433MHz E32-TTL-100 LoRa SX1278/SX1276 433M RF Wireless Transceiver Module ☆BrzoneSeMallVP al mejor precio

0
calificaciones
494,34 MXN
55% OFF
222,45 MXN
Se envía desde

Descripción del producto

Specification: Brand new Model: E32-TTL-100 Size: approx. 21 * 36mm (without antenna and SMA) Interface: UART Power: 20dBm Distance: 3000m RF connector: SMA-K Frequency: 433MHz (410-441MHz) Operating temperature: -40 ~ +85℃ Operating temperature: 10% ~ 90% Storage temperature: -40 ~ +125 Frequency band: 410 - 441MHz, default: 433.0MHz, channel: 32, 1MHz stepped frequency,Recommending frequency: 433±5MHz, Connector: 1*7*2.54mm, plug-in Supply voltage: 2.3 - 5.5V DC (Note: the voltage higher than 5.5V is forbidden.) Communication level: UART, USART Operation range: about 3000m (test condition:clear and open area & maximum power, antenna gain: 5dBi, height: > 2m,air date rate: 2.4Kbps) Transmitting power: Maximum 20dBm(100mW)| four optional level(0-3),step by 3dBm Air data rate: default 2.4kbps, can be configured to 0.3, 1.2, 2.4, 4.8, 9.6, 19.2Kbps Standby current: 2.0uA (mode 3,M1=1, M0=1) Transmitting current: 110mA at 20dBm Receiving current: 14.5mA (mode 0 or mode 1) | minimum 30uA (mode 2 + 2s wake-up time) Communication interface: UART, 8N1, 8E1, 8O1, eight kinds of UART baud Rate, from 1200 to 115200 bps Driving mode: UART can be configured to push-pull/high pull, open-drain Transmitting length: 512 bytes buffer,58 bytes per package Receiving length: 512 bytes buffer,58 bytes per package Address: 65536 configurable addresses(easy for network, broadcast and fixed transmission) RSSI support: built-in intelligent processing Sensitivity: -130dbm at 0.3Kbps ( sensitivity has nothing to do with serial baud rate and timing) Antenna type: SMA-K (external thread hole, 50 ohm impedance) Certification: CE, RoHs, FCC Feature: E32-TTL-100 is a wireless transceiver module based on SX1278 from SEMTECH(can be transmitter and receiver both). Adopts LoRa spread spectrum technology, with this technology the transmitting distance and penetration ability of the module improved more than 1 times compared with traditional FSK. The module features FEC (forward error correction) algorithm, which ensure it's good anti-interference ability. Fine workmanship and stable performance. E32-TTL-100 can be compatible with other E32 modules. Package included: 1pc x Wireless Transceiver Module Note: Please allow 1-3mm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

De la misma tienda

De la misma tienda

También te puede interesar