Vender 【lucaiitombert】 Dual Motor Driver 1A TB6612FNG Microcontroller L298N DRV8833 [MX] al mejor precio
0
calificaciones
192,86 MXN
Se envía desde |
---|
Descripción del producto
Features:
Size: 18 * 21mm
Input voltage: 2.7 V – 10.8 V
Single H-bridge output current: 1.5A, can drive two DC reduction motors.
Built in over-current protection, short-circuit protection, under voltage locking and overheating protection. Sleep mode with low power consumption.
Purpose: it can drive DC motor below 1.5A and 4-wire stepper motor.
Pin description:
Ani1: logic input control port of AO1, level 0-5V.
Ain2: AO2 logic input control port, level 0-5V.
Bni1: Bo1 logic input control port, level 0-5V.
BIN2: Bo2 logic input control port, level 0-5V.
AO1 and AO2 are 1-way H-bridge output ports connected with two pins of a DC motor.
Bo1 and Bo2 are two H-bridge output ports connected with two pins of another external direct motor.
GND: ground.
The voltage range of the VM chip and the motor is 10.5 v.
STBY: grounded or suspended chip does not work, no output, connected to 5V; level 0-5V.
NC: empty foot
Features:
Power supply voltage: VM=15V max, VCC=2.7-5.5V
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short brake/stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1" spaced pins
Filtering capacitors on both supply lines