Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (1)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (2)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (3)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (4)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (5)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (6)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (7)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (8)
Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX (9)

Vender Ivywoly Nitro OBD2 EcoOBD2 15% Fuel Save More Power ECU Chip Tuning Box Plug&Driver MX al mejor precio

0
calificaciones
93,56 MXN
50% OFF
46,78 MXN - 56,5 MXN
Se envía desde
Color
Green
Yellow
Red
Blue

Descripción del producto

Green for Benzine Cars. Yellow for Benzine Cars. Red for Diesel Cars. Blue for Diesel Cars. NitroOBD2/EcoOBD2 Is Very Easy to Use. Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then NitroOBD2 adjusts itself to match your car perfectly. NitroOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map. The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it. NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine. NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are high quality. Installation and Calibration 1 - Pull the Car Key out from the ignition. 2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2 3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car) 4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU) 5 - Start up the engine. 6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.Each device available for LPG. Note: There is 2-3% difference according to manual measurement. Please check the measurement chart carefully before you buy the item. Please note that slight color difference should be acceptable due to the light and screen.

De la misma tienda

De la misma tienda

También te puede interesar