Vender COS W1211 Thermostat Cooling Heating Temperature Controller for Incubator Bird Aquario Car Aquarium Regulator AC110-220V al mejor precio

#W1211 #Thermostat #Cooling #Heating #Temperature #Controller #for #Incubator #Bird #Aquario #Car #Aquarium #Regulator #AC110-220V W1211 Thermostat Cooling Heating Temperature Controller for Incubator Bird Aquario Car Aquarium Regulator AC110-220V W1211 Thermostat Cooling Heating Temperature Controller for Incubator Bird Aquario Car Aquarium Regulator AC110-220V Technical parameter: Product Name: Temperature Controller Product model: W-1211 Power supply voltage: AC110-220V 50HZ Temperature range: -40~ + 120°C Temperature measurement accuracy: ±0.5°C Sensor line length: 100CM Size: 79.5*43*35mm Shell material: flame retardant ABS Display panel light description: Heat: heating mode, in the heating mode, the heating relay works. Cool: Cooling mode. In cooling mode, the cooling relay works. TC: temperature control, Heat + TC, temperature control in heating mode. Cool + TC, temperature control in cooling mode PT: Press delay, press delay before compressor starts in cooling mode, LED flashes when press delay Timer: timer switch on and off, in timing mode, LED flashes Menu description: Menu Menu function Set temperature Factory setting P1 Target-temperature setting value -40~+120℃ 10.0℃ P2 Temperature difference setting value 0.3~10.0℃ 0.5℃ P3 Press delay 1~10 minutes 3 minutes P4 temperature correction -10~+10℃ 0℃ Key description: (short press: completed within 3 seconds, long press: 3 seconds) 1. Power button: 1) In the power-on state, short press to view the target-temperature setting value, and long press to turn off. 2) In the shutdown state, long press to start 3) In the setting mode, short press to confirm and return to the home page to display the temperature 2. Setting key: 2) Long press to enter the setting mode option. 3) Short press under the setting mode option to confirm the currently selected setting mode. 3. Minus key: In the setting mode interface, short press once to decrement 1, long press to continuously decrement.In non-setting interface, long press to cancel timing 4. Add key: In the setting mode interface, short press once to add 1, long press to continue to add.In the non-setting interface, short press to view the setting value of scheduled shutdown time. Long press timing 5. Combination key: setting key + digital minus (restore factory settings) In the power-on state, pressing the key combination at the same time will restore the factory settings (long press) Mode description: Under normal operation, the digital tube displays the real-time measured value of the current temperature, and performs automatic recognition and conversion of the cooling and heating working mode. 1. Cooling mode: 1) When the real-time temperature ≥ target-temperature set value + temperature difference set value enters the cooling state, the Cool indicator lights, and the cooling relay works. 2) When the cooling temperature drops to the target-temperature value, the cooling relay stops working, the TC indicator lights, the thermostat enters the temperature control state, and the temperature control range is the temperature difference setting value. 3) When the cooling temperature rises ≥ the temperature difference setting value, the TC indicator is off, the PT indicator flashes, the thermostat enters the press delay state, and the refrigeration relay starts to work after the press delay. 2. Heating mode: 1) When the measured temperature ≤ target-temperature set value-temperature difference set value, it enters the heating state, the Heat indicator lights, and the heating relay works. 2) When the heating temperature reaches the target-temperature value, the heating relay stops working, the TC indicator lights, the thermostat enters the temperature control state, and the temperature control range is the temperature difference setting value. 3) When the heating temperature drop value ≥ temperature difference setting value, the TC indicator is off, and the heating relay works. 3. Timing on/off mode: (timing range 1 to 9999 minutes) 1) Through the digital addition and subtraction key combination, set the scheduled shutdown countdown time in the power-on state, and set the scheduled shutdown countdown time in the power-off state. 2) In the timing mode, you can use the power button to turn on or off to cancel the current timing state. Note: 1) In normal mode, when you press the power button or plus key to check the setting parameters, it will return to normal mode after 1 second. 2) In the setting mode, if no button is pressed, it will automatically return to the normal working mode after 10 seconds. 3) In the setting mode, when a certain option value is set, if the power button is not pressed to confirm the return, the value will not be saved when it returns to the normal working mode automatically after 10 seconds. Precautions: 1. It is not allowed to immerse water, liquid or debris into the intelligent thermostat 2. Non-professionals are not allowed to disassemble 3. Pay attention to the terminals behind when electrifying, and be careful of electric shock 4. N and L are AC 110-220V power supply. Do not use DC power, the control output can be connected to DC equipment Package included: 1 × AC 110-220V W1211 Temperature Controller Module 1 x Temperature Sensor