Vender 433MHZ Clone Fixed Learning Code Cloning Duplicator Key Fob Distance Remote Control examen al mejor precio

Package Included: 1*433MHZ Remote Control Specifications: The scope of application of the copy remote control: Ordinary fixed code (chip type 2260, 2262, 2264), learning code (1527, 2240) remote control. technical parameter: 1. Working voltage: DC 12V 2. Working current: 14mA 3. Quiescent current: 0mA 4. Working frequency: 433 5. Transmitting power: 10mW 6. Launch distance: 50m (open environment) Description: 00% Brand New and High Quality！ Please confirm before buying, this remote control is 433mhz！ (note: rolling code remotes will not work). 1. Code pairing (learning) Place the original remote control and the copy remote control as close as possible, first press a button of the original remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will flash 3 times and then quickly Flashing, it means that the address code of the original remote control button has been learned successfully. The other keys are operated in the same way for learning. 2.clear code Press the unlock button and the lock button at the same time for 2 seconds, the LED light starts to flash 3 times. At this time, keep the lock button pressed and release the unlock button. Press the unlock button three or four times within 5 seconds, and the indicator light flashes quickly. The code has been cleared. Test whether the existing code of the remote control has been successfully cleared: When you finish the clearing action, you can press any button of the copy remote control. If the LED does not flash immediately at this time, it will flash after 2 seconds, that means Copy the original code of the remote control has been completely cleared, if the LED still flashes quickly, it means that the code still exists and needs to be cleared again. 3.restore the cleared code The copy remote control has a recovery function. If you accidentally clear the address code of the normal copy remote control during use, you can press the start and mute buttons (the next two buttons) on the remote control at the same time. After about three seconds, the LED will flash 3 times. It starts to flash quickly, which means that the cleared address code is successfully restored. *Precautions: 1. Before using our copy remote control to copy, first clear the existing code of the self-copy remote control. 2. The self-copy remote control cannot copy the rolling code Tips for operation: How to copy some of the keys that cannot be controlled in the future, but the others can be controlled, you can use the tips for clearing and restoring operations. The specific operations are as follows: (1) Perform code clearing operation first; (2) After the code is cleared successfully, copy the keys that were not successfully copied just now, and do not copy the keys that have been successfully copied before